-
What is Liquitex acrylic medium actually used for?
-
Are Liquitex paint sets worth it for a classroom, or should I buy tubes individually?
-
Where should I put highlights when painting with acrylics?
-
How does a weighted average calculator actually help compare paint costs?
-
How do I check whether a Liquitex product is safe for students?
-
Should small orders — like a $200 trial — still be taken seriously?
I've spent the last eight years handling art supply orders for schools and independent studios. In that time I've personally made — and written down — 23 significant ordering mistakes totaling roughly $14,000 in wasted budget. The answers below come from that ledger. If you're buying Liquitex for a classroom, a studio, or a retail shelf, treat this as the list I wish someone had handed me in 2017.
What is Liquitex acrylic medium actually used for?
Medium changes how paint behaves — its consistency, how fast it flows, how long it stays open on the palette, how glossy it dries, and how well it clings to a surface. It's not a protective topcoat. Varnish is a separate product, applied only after the painting is fully cured.
I learned that distinction the hard way in 2017. I'd assumed gloss medium was basically a varnish, so I ordered six jars and let a student brush it over an entire finished canvas. By the next morning the underlying line work had started to sag and bleed. That was $120 in materials and a crying student in one shot. Now there's a hard rule in our studio: nobody opens a medium before reading the technical data sheet. Mediums are built for extending paint, thinning it into a wash, or speeding dry time — and the mixing ratio matters way more than most people think.
Are Liquitex paint sets worth it for a classroom, or should I buy tubes individually?
It depends on which colors actually get consumed. Sets usually beat individual tubes on a per-milliliter basis — but only if nearly every color in the box is going to get used. In a typical classroom, titanium white and a good yellow disappear fast. Three or four other colors sit in the rack until they harden.
In September 2022 I ordered 40 sets for a 47-piece requirement, roughly $320 on the invoice. Looking at actual consumption six months later, about 60% of the colors in those sets had never been touched. When I ran the real volume through a weighted average calculator instead of just eyeballing the sticker price, the cost per usable canvas came out higher than buying five large titanium tubes direct. So glad my assistant asked me to double-check before approving — I was about one click away from ordering 200 sets based on the same broken logic. I still buy sets, just selectively: only when the palette in the box matches what the class actually paints.
Where should I put highlights when painting with acrylics?
Where the light actually lands — not in the center of every object. Imagine a sphere lit from the upper left: the brightest point sits up and to the left, not dead middle. Everything else stays soft and slightly broken up.
The when matters even more than the where. Acrylic dries fast. If you drop highlight while the base paint is still wet, the two half-mix and turn muddy. I got this wrong in 2018 with twelve canvases prepped for a workshop — I told the group to "add highlights at the end" and half of them did it while the paint was still tacky. All twelve turned out soft. Three hours of repainting, plus a very awkward apology to the client. Now the instruction is: wait 20 minutes, then hit the high points with a dry brush. Small, targeted, and last.
How does a weighted average calculator actually help compare paint costs?
Because raw unit price lies about what you're actually spending. A 200ml tube sounds cheaper than a 75ml one, but the useful number is the cost per milliliter of the paint you'll realistically consume — and that flips between sizes more often than you'd expect.
We use it on every order over 30 items. List each item, plug in the price and the real volume consumed over a term, and let the weighted average tell you the true blended cost instead of averaging the sticker prices. When we re-ran our standing order in Q1 2024 with this method, we found we'd been overpaying roughly 22% by chasing whichever vendor showed the lowest price on the biggest line item. Most of the overrun came from the small tubes we kept adding at checkout. Forty small tubes a year adds up faster than anyone wants to admit.
How do I check whether a Liquitex product is safe for students?
Check the label, not the marketing copy. Two specific things to look for: the ASTM D-4236 conformance statement (the U.S. labeling standard for chronic health hazards in art materials) and the ACMI AP seal (Approved Product — evaluated by a toxicologist for general use, including schools). Both are third-party markers, not a brand's own "non-toxic" claim.
Not every pigment is classified the same way, either. Some cadmium-based colors and specialty pigments have stricter handling guidance than a basic student-grade yellow. In 2019 a shipment of ours got held at the loading dock because the cadmium red didn't carry the AP label the school's purchasing policy required. Three days of paperwork, a shelf full of paint nobody could touch, and a very patient facilities coordinator. Now I check the label on every single color in an order — even the nine-tube restock.
Should small orders — like a $200 trial — still be taken seriously?
Yes, and I genuinely wish more suppliers acted like it. In my first year I tried to place a $180 order and got ignored by three bigger vendors. The fourth quoted it properly, didn't pad the shipping, and called me to confirm one shade. Eight years later that same vendor handles roughly $45,000 a year from us. Every time the contract renews, I remind them why.
Small doesn't mean unimportant — it means potential. A small studio placing a $200 trial order is testing whether you'll be the vendor it still buys from when it grows. If you ask me, high minimums and dismissive replies to small queries do more long-term damage than any competitor ever will. Be straightforward about MOQs, quote the small order honestly, and treat the trial as a real relationship. You have no idea what it turns into.